New Surplus Engine. Same as Perkins 404C-15. This one is kinda rare in that is is 4 cylinders and only 1.5 liter. $3500. The 3 cylinder 1.5 liter is much more common. We have those too. This unit is sold, Read more…
This engine is rebuilt. It is electronic common rail fuel injected. It is spec’d for a Terex PT100G. I have other engines available that are spec’d for other applications.
This engine is rebuilt. It has the electronically controlled Bosch VP30 fuel injection pump. It has has the gear driven balancer option and is spec’d for a wood chipper application. I have more engines spec’s for other applications available.
New Surplus. This is rated about 24hp. It is comparable the the Perkins 403C-11, 403D-11, Caterpillar 3009, 3010, C1.1. This unit is sold, but call Tim today at 651-983-4331 to see what we can do for you.
Also available, part to build into an Open Power Unit(radiator kits, air filters, mufflers…)
New Surplus Perkins 404D-22 Engines for a Generator or a Welder. These are fixed speed set at 1800rpm. Excellent engine for a re-power of a vintage welder. These engines can be found in many welders produced by Miller and Lincoln. Read more…
New Surplus Caterpillar C2.2 Open Power Unit rated at 50 horsepower. This in new surplus, sold outright. No core charge, no core needed. This is the Caterpillar equivalent of Perkins 404D-22. Not shown but included in the price is your Read more…
Low hour(106 hrs), used stationary generator set. 25kw, 3 phase, natural gas fueled. Model G25G1 25kW, 480V WP Enclosed Natural Gas Generator Set. This unit is sold, but call Tim today at 651-983-4331 to see what we can do for Read more…
New Surplus Perkins 1104D-44TA Caterpillar C4.4 Open Power Unit. $11,800. This unit is sold, but call Tim today at 651-983-4331 to see what we can do for you.
This engine has the gear driven auxiliary drive option. This unit is sold, but call Tim today at 651-983-4331 to see what we can do for you.
972 hrs, complete as pictured. A copy of the PSR(Product Status Report) is available. Engine has been test run and has no issues. THIS ENGINE IS NO LONGER AVAILABLE. WE DO HAVE GOOD USED AND RE-CONDITIONED BLOCKS HEADS AND CRANKSHAFTS.
New surplus genuine Perkins p#2647A001 gear driven governor for engine model 4.236, model code LE, gas or propane fueled. This is a “new take-off”. It was taken off of a new engine many years ago. Due to it’s age, it Read more…
Nippondenso model 6C-500 Compressor. This is a New Take-Off from a freight damaged reefer unit that was dismantled for parts. It was powered by a 4 cylinder 40hp engine. I don’t believe the refer unit was ever installed, it still Read more…
New Surplus Shibaura N844 2.0 liter engine. No core required! Cores are rare and valued $1000-$2000.This engine is new and in it’s original crate. It has the rare gear driven balancer assembly that is required for tractor applications. Comes as Read more…
New Surplus Perkins model 1004-40(T) Short block Engine assembly. Perkins part number AQ39201. Perkins list price on this item is $11,134.42. This engine is listed as replacement for Perkins engine models 1004-40, 1004-40T and 1004-40TA. We will sell for $3500. Read more…
Swisher rough finish mower for a customer. The spindle mounting bolts loosened up, thing shook apart and busted up stuff. I cut out the two steel layers totaling in 5/16″ thickness and put in a repair patch plate 5/8″ thick. Read more…
The hydraulic cylinder on the shop press I built has been leaking for quite a while. The leak had been getting progressively worse.
A local machine shop sends me work occasionally. He is rebuilding a 1911 Maxwell engine for a customer that is restoring it. The exhaust flange on this Y pipe is pretty rough. It was silver soldered when made 107 years Read more…
The Poulan model 3400, 3700, 3800 and 4000 chainsaws are undervalued. They are a professional grade chainsaw and in many ways ahead of their time when introduced in 1979.
This Swinger model 200D wheel loader has a pinion seal leak. The wheel loader was built in Barnsville, MN by Dynamic industries in 1979. Swinger was later sold to NMC Wollard of Eau Claire WI and are still produced today.
This is a video of a “Bucking Stand” I built for “Interfaith Charities for Burnett County”. It has greatly increased production of firewood and minimized the handling of the firewood. One man with a chainsaw and another with a loader Read more…
I picked up an Ingers Universal OD grinder at an auction. The price was right, or so I thought. It is in rough shape.
MFR Industries provides experienced, reliable broaching services for a wide variety of applications. Please contact us today for more information about our broaching services.